1000 Lb. Economy Lime Spreader
  • 5 Foot Spread Width
  • 300 Pounds Empty
  • Manufacture from 14 gage steel, completely welded
  • Sand Blasted and Powder Coat Finish
  • Single Beater, Wheel Driven
  • Large Top Screen
  • 16”Diameter Pneumatic Tires with 5” Clearance
  • Pin Hook-Up
  • 12.68 cubic feet

The 1000 Lb. spreaders can be pulled with a 500cc or larger ATV or comparable lawn tractor.

The 1000 Lb. lime spreader is manufactured with 14 gage steel, this unit is completely welded except for the bottom gate which is bolted in place for easy change out; it is sand blasted and powder coated before leaving the factory for a long lasting finish. This allows you to spread materials other the lime such as fertilizer or peat moss, with a good wash and lube after use this finish will help keep the unit looking good and operating for many years. All units have pneumatic tires and laser cut slanted holes on the gate to allow the lime to drop with slight overlapping so you don’t miss any area. When fully open the overlapping slots are ¾ inch wide.

The 1000 Lb. lime spreader has a single beater that is wheel driven in the bottom of the machine to push the lime so you will get a nice even flow of lime. The large top screen will help remove any of the larger rocks and break up the lime as you fill the limer.

Here are some specifications on the 1000 Lb. Ground Buster drop lime spreaders that can be pulled with your ATV or comparable lawn tractor:

1/2 ton unit has a 5 foot spreading width, weighs 300 pounds when empty. Have 16” pneumatic tires with 5” clearance. Is provided with a pin hook up and has a handle with 4 adjusting holes which regulate the openings on the gate.