4’ Tilling Machine
  • Use with a 500cc or larger ATV or most tractors with Cat1 3PT Hookup
  • Manufactured from high quality 1/4” steel tubing and angle iron
  • Abrasive blasted and power coated for a long lasting finish
  • Front and back disc blades (6 discs on each set)
  • Heavy duty discs and easy adjustable angle settings for  both front and back discs
  • Optional equipment:
    • Wheel Kit (Required to lift and lower disk for ATV use) 
    • 12V Lift Kit w/variable speed controller (Required for ATV use) or hydraulic lift kit
    • Draw Bar Hitch (Required for ATV use)
    • Roller and Grading Mat 
    • Broadcast Spreader and mounting bracket
$3,195.00

4 Ft GroundBuster Tilling/Disc Machine.

The GroundBuster 4 foot tilling/disc machine can be pulled with a ATV of 500 cc or larger providing you purchase the wheel kit option. The 4 foot tilling machine is manufactured with high quality ¼” steel tubing and angle iron. It has 2 sets of six HD 18'' disc blades with two extremely easy to turn crank handles to adjust the angle of both the front and rear sets of discs. If you are working a piece of ground with lots of sod or weeds you can set the angle to work the ground very aggressively. This will help so that you will make fewer passes to get the soil tilled and will save both time and money. The 4 foot tilling machine can be equipped with a grading mat and roll bar. By having the grading mat and roll bar you will achieve great results no matter what type of seed you will be planting. By purchasing the roller and mat you will be able to work the ground to the needed texture. For Example, large seeds like oat or sunflower may not need the soil as smooth where as small clover or brassica seed would require the use of the grading mat and roller to make the soil more level and smooth. The nice thing about this machine is you can position the roller or grading mat to use either one or both at the same time. This also allows you to use the roll bar so that it floats over the ground or locked in place to compress the soil even more. All this is done very easily with pins and flipping various pieces up or down. The Tiller/Disc also comes with a optional wheel kit. The wheel kit allows you to travel from plot to plot and more importantly it allows you to adjust the depth of the discs. If you are using a ATV this is very important in case you get into a wet spot you will not drag down your ATV. The wheel kit must be attached to a 12 volt battery for automatic adjustment. You can also pop a cap off the top of the motor and adjust with a ½” wrench or ratchet. . All machines are abrasive blasted and powder coated to give you a long lasting finish.
 
The HD 4 foot tilling/Disc machine is provided with 2 sets of six discs and 2 crank handles to adjust the disc angle.